Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM
NM3650E _55 Steering _082921 POWER ASSIST SYSTEMS _0400086 POWER STEERING SYSTEM GE GENERAL F

POWER ASSIST SYSTEMS  POWER STEERING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A rack-assist electric power steering system is provided.


b.

A rack-assist electric power steering system uses a motor and reduction mechanism installed to the power steering gear assembly (for rack and pinion) housing to transfer steering assist torque directly to the rack shaft in order to reduce steering effort.


c.

Fine judder and steering vibration have been reduced.


d.

There are 2 selectable modes with differing assist torque control characteristics.


e.

Electric power steering control, with speed-dependent variable assist torque, is provided.


f.

Variable sport steering, which reduces steering angles with variable gear rack ratios, is provided.


g.

The active reverse function helps return the steering wheel back to the center position without manual operation by the driver.


h.

The active anti-rolling system uses the electric power steering system to compensate for vehicle roll.



MAIN FEATURES


a.

The electric servomotor generates assist torque.


b.

The assist torque is added to the steering force applied by the driver. Furthermore, based on the driving conditions, steering compensation movements are transferred to the front wheels.


c.

The motor and power steering ECU are integrated into a compact design on the power steering gear assembly (for rack and pinion) housing.


d.

The power transmission mechanism uses a belt and a ball screw.


e.

The design is based on the concept of Axle Parallel Alignment (APA).