CONSTRUCTION
The windshield wiper is twin-arm synchronized system with stroke control.
The wiper motor is a rotary-type motor without an electronic control circuit, and is controlled by the main body ECU (multiplex network body ECU) via double relays.
FUNCTION
After IG ON (terminal 15 has been turned on), all functions of the windshield wiper can be operated using the steering column switch's wiper control switch (windshield wiper switch assembly).
The end position of the wiper motor is detected by a reset contact integrated into the wiper motor. When the wiper motor reaches the end position, the reset contact switches the ground to the main body ECU (multiplex network body ECU).