CONSTRUCTION
Windshield Washer Pump
The windshield washer pump directs washer fluid for cleaning the windshield through washer jets and onto the windshield.
The windshield washer pump is installed on the washer jar.
The windshield washer pump is connected to the main body ECU (multiplex network body ECU).
Washer Fluid Level Sensor
The washer fluid level sensor detects when the washer fluid level in the washer jar drops below the required level.
The washer fluid level sensor is installed to the side of the washer jar.
FUNCTION
Windshield Washer Pump
To wash the windshield, the wiper switch is pulled toward the driver (opposite from the direction of travel). While the wiper/washer switch remains pulled, the windshield washer pump delivers fluid to the windscreen. After a maximum of 10 seconds, the main body ECU (multiplex network body ECU) switches off the windshield washer pump.
On the next activation there is a forced rest period in order to prevent overheating of the windshield washer pump.
Washer Fluid Level Sensor
The washer fluid level sensor sends a modified signal when the fill level of the washer fluid is too low. The information appears in the form of a Check Control message on the TFT display in the instrument cluster. The washer fluid level sensor is connected to the main body ECU (multiplex network body ECU). The signal is transmitted to the instrument cluster via the PT-CAN.
| *1 | Windshield Washer Jar Assembly | *2 | Washer Fluid Level Warning Switch |
| *3 | Windshield Washer Motor and Pump Assembly | - | - |