Home › Engine / Hybrid System › STOP AND START › STOP AND START SYSTEM
NM3650E _51 Engine / Hybrid System _082978 STOP AND START _0400267 STOP AND START SYSTEM DE DETAILS F

STOP AND START  STOP AND START SYSTEM  DETAILS  ACCUMULATOR  


CONSTRUCTION


a.

The transmission oil pump is no longer driven during the engine stop phases. As the oil supply pressure is interrupted and the shift elements are open, power is no longer transmitted in the transmission.


b.

When the auto start/stop is activated, the maximum gearbox oil pressure must be present for the starting process to take place dynamically without a noticeable delay. However, the mechanically driven transmission oil pump cannot build up this pressure quickly enough when the engine starts.


c.

An oil volume reservoir is used for this reason. Owing to the volume of transmission oil stored here under pressure, the shift elements can be filled as soon as the vehicle is driven off, even before the transmission oil pump has built up the necessary pressure.


d.

The hydraulic impulse storage is integrated in the automatic transmission. It is located in the transmission oil sump behind the mechatronics when facing in the direction of travel.

W141417C01
1.979,0.406 2.292,0.563 0.313,0.156 10 false *1 3.208,3.323 3.521,3.479 0.313,0.156 10 false *2 4.302,3.323 4.615,3.479 0.313,0.156 10 false *3
*1 Transmission Housing *2 Mechatronics
*3 Hydraulic Impulse Storage - -