CONSTRUCTION
The automatic transmission is controlled by the mechatronics. The mechatronics is a combination hydraulic unit and transmission control ECU.
The transmission control ECU processes transmission-end, engine-side and vehicle signals. The control system calculates the optimum gear using the input signals and stored data. The control system also calculates the optimum pressure supply for the gear selection as well as the adjustment of the hydraulic pressure to the torque to be transferred.
The input parameters include the driver's choice (selector lever position), engine speed, engine temperature and injection period.
Sensors in the transmission control ECU deliver input parameters regarding the transmission input speed, transmission output speed and transmission oil temperature.
The transmission control ECU drives the valve in the hydraulic unit directly.
| *1 | Hydraulic Unit | *2 | Transmission Control ECU |