CONSTRUCTION
The 8-speed automatic transmission is equipped with a parking lock to secure the vehicle against rolling away. The parking brake works by using a parking lock pawl that engages in the gearing of the parking lock gear. The parking lock gear is located on the transmission output shaft. The parking lock pawl is engaged by spring force. The parking lock is designed to ensure a secure stopping position of the vehicle under the following conditions:
Uphill or downhill gradient of up to 32%
Speed below 2 km/h (1 mph)
The parking lock cannot be activated at speeds above 5 km/h (3 mph).
The parking lock is actuated electrically. The notched plate in the transmission is equipped with a parking disc brake, and this disc brake fulfills the roles of the parking cylinder, solenoid valve and lock solenoid. A distinction is made between mechanically engaging the lock and associated electric activation. The parking lock operates by spring force. The parking lock operates electrically in the following situations:
P button on selector lever is operated.
After stopping the engine in the current shift position.
If, when stationary, selector lever position R or D are engaged and neither the accelerator pedal nor the brake pedal are being operated, the seat belt of the driver's seat is released and the driver's door is opened.