Home › Drivetrain › 8HP51 (AUTOMATIC TRANSMISSION / TRANSAXLE) › ELECTRONIC SHIFT LEVER SYSTEM
NM3650E _52 Drivetrain _082979 8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE _0400269 ELECTRONIC SHIFT LEVER SYSTEM GE GENERAL F

8HP51 AUTOMATIC TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The transmission floor shift assembly enables selection of a drive position of the automatic transmission. The transmission floor shift assembly is located in the center console. The transmission floor shift assembly is designed as a dedicated control unit. The transmission is not controlled mechanically, but rather is controlled electronically via this transmission floor shift assembly.


b.

A selector lever lock prevents accidental shifting to the "R" position. To release the lock, the brake pedal must be depressed and the selector lever lock on the selector lever must be pressed.