CONSTRUCTION
The brake actuator assembly consists of a brake actuator with disturbance-optimized adjustment valve, high-frequency-driven 2-circuit piston pump and skid control ECU equipped with the latest technology.
| *1 | Brake Actuator Portion | *2 | Skid Control ECU |
| *1 | Brake Booster Assembly | *2 | Primary Circuit |
| *3 | Secondary Circuit | *4 | Primary Circuit Damping Volume |
| *5 | Secondary Circuit Damping Volume | *6 | Separator Valve |
| *7 | Electric Changeover Valve | *8 | Rear Inlet Valve LH |
| *9 | Rear Inlet Valve RH | *10 | Rear Outlet Valve LH |
| *11 | Rear Outlet Valve RH | *12 | Rear Brake LH |
| *13 | Rear Brake RH | *14 | Front Brake LH |
| *15 | Front Brake RH | *16 | Front Outlet Valve RH |
| *17 | Front Outlet Valve LH | *18 | Digital Brake Pressure Sensor |
| *19 | Front Inlet Valve RH | *20 | Front Inlet Valve LH |
| *21 | Low Pressure Accumulator | *22 | DC Motor |
| *23 | 2-circuit Piston Pump for Secondary Circuit | *24 | 2-circuit Piston Pump for Primary Circuit |