CONSTRUCTION
The aluminum pot reduces both weight and unsprung masses. Partly directional cooling air channels for optimizing cooling. Front discs with a diameter of up to 348 mm (13.7 in.) and front brake pads with a height of up to 76 mm (2.99 in.) are fitted. Front discs on the front axle are internally vented. The various brake diameters with different pad heights and friction ring thicknesses are used for each vehicle in the optimal front disc brake cylinder assembly combination in order to achieve the best performance at the lowest possible weight.
For example, brake designation 17" FA (P4. 40-44/36-AL; 348 x 76 LB.):
Aluminum fixed front disc brake cylinder assembly with 4 pistons (40 or 44 mm (1.57 or 1.73 in.)) for lightweight front disc, inner-vented with a diameter of 348 mm (13.7 in.) and a friction ring thickness of 36 mm (1.42 in.).
| *1 | Front Disc | - | - |
| *a | The illustrations shown are examples only. | - | - |