CONSTRUCTION
The aluminum pot reduces both weight and unsprung masses. Partly directional cooling air channels for optimizing cooling. Rear discs with a diameter of up to 345 mm (13.6 in.) are fitted. Rear discs on the rear axle are internally vented. The various rear discs with different rotor thicknesses and rotor diameters are combined with the optimal rear disc brake cylinder assembly in order to achieve the best performance at the lowest possible weight.
For example, brake designation 17e" RA (CILMC5 44/24 GGG; 345 x 24 LB.):
Cast iron single-piston floating rear disc brake cylinder assembly (44 mm (1.73 in.)) for lightweight rear disc, internally vented with a diameter of 345 mm (13.6 in.) and a friction ring thickness of 24 mm (0.945 in.).
| *1 | Rear Disc | - | - |
| *a | The illustrations shown are examples only. | - | - |