OUTLINE
Front axle
A front knuckle (steering knuckle) with a reinforced construction has been adopted.
| *1 | Front Knuckle (Steering Knuckle) | - | - |
| *a | The illustrations shown are examples only. | - | - |
Rear axle
A rear axle with a reinforced construction has been adopted.
| *1 | Wheel Carrier (Rear Axle Carrier Sub-assembly RH) | - | - |
| *a | The illustrations shown are examples only. | - | - |
Double-row ball bearings are used for the rear axle hub and bearing assembly RH.
| *a | Outer Race | *b | Hub Shaft |
| *c | Spur Gearing | *d | Inner Race |
| *e | Retainer | *f | Balls |