OUTLINE
The electronically controlled limited slip differential has a rear differential carrier assembly that splits engine torque between the left and right wheels, with an electronic control system that performs differential lock in response to driving conditions, allowing torque distribution to be changed as needed. Torque distribution between left and right wheels is 1500 N*m.
The electronically controlled limited slip differential is controlled by the differential lock ECU, and has the following functions:
When the vehicle starts moving, the maximum engine torque is transmitted to the wheels.
When the road surfaces under the left and right wheels have different coefficients of friction and the wheels are turning at different speeds, the engine torque is transmitted to the wheels in a way that minimizes losses.
During high-speed cornering, the engine torque is transferred to the outer wheels.
During cornering, or during lane changes when oversteer is detected, stable engine torque is transmitted to the wheels based on the detected yaw rate signal in order to provide greater driving stability.
When drifting, when the driver has intentionally oversteered, locking torque control is performed based on the yaw rate signal and accelerator pedal opening angle.
MAIN FEATURES
The rear differential carrier assembly used with the electronically controlled limited slip differential connects to the left and right drive shafts via multiplate wet clutches. The clutch is intermittently and steplessly controlled by the electronic control motor in response to driving conditions.
The electronically controlled limited slip differential has the following characteristics.
Improved handling.
Continuously optimized to maintain traction based on driving conditions.
Improved driving stability.