Home › Power Source / Network › B48 (BATTERY / CHARGING) › CHARGING SYSTEM
NM3650E _57 Power Source / Network _082986 B48 BATTERY / CHARGING _0400290 CHARGING SYSTEM GE GENERAL F

B48 BATTERY / CHARGING  CHARGING SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

For auto start/stop function, a high performance generator assembly is used in consideration of discharge of the battery when the engine is stopped.


b.

The generator assembly is controlled via communication with the ECM, so that while protecting the battery, the optimum level of current is continually being generated in order to meet the requirements of the various systems in the vehicle.


c.

A high performance Absorbent Glass Mat (AGM) battery has been adopted to handle the increased charge-discharge cycles of the auto start/stop function. The AGM battery differs from a conventional battery in that its separator is made of a mat of glass fiber into which the electrolyte is absorbed.


d.

The safety battery terminal that operates at the time of a collision and prevents a short circuit from the plus terminal of the battery at the time of an accident is adopted.