CONSTRUCTION
A gravity-die-cast aluminum alloy cylinder head sub-assembly has been adopted.
A 2-part water jacket with split cooling and distribution channels has been adopted.
The exhaust manifold and cylinder head have been integrated, and have been provided with internal coolant pathways. (Models with B58B30M engine)
The exhaust flow of the exhaust pathways and valve insertion locations have been optimized to reduce excess heat.
| *1 | Cylinder Head Sub-assembly | - | - |
| *a | Cylinder Head Internal View | *b | Exhaust Manifold |
| *c | Upper Side Water Jacket | *d | Lower Side Water Jacket |