CONSTRUCTION
The exhaust manifold integrated into the cylinder head has been provided with a turbocharger sub-assembly. (Models with B58B30M engine)
The turbocharger housing has been integrated with the cast exhaust manifold to save space. (Models with B58B30O engine)
The twin-scroll type* turbocharger sub-assembly has a flow-optimized design, realizing enhancements to both power performance and responsiveness.
*: Rather than a twin turbo system using 2 separate turbochargers, exhaust gas is used to drive a single turbine via 2 separate pathways.
The volume of exhaust gas flow to the turbine is controlled via the opening and closing of an electrically-operated wastegate valve.
The catalytic converter is located close to the engine and the electrically-operated wastegate valve for optimum emission compliance.
Reduction of the mass moment of inertia of the rotor for increased power outputs.
Reduction of background noise from the electrically-operated wastegate valve for improved acoustics.
| *1 | Turbocharger Sub-assembly | *2 | Turbocharger Actuator and Link Assembly
·
Electrically-operated Wastegate Valve |
| *a | Thrust Rod | - | - |
|
Intake Air |
|
Exhaust Gas |
| *1 | Exhaust Manifold
·
Turbocharger Sub-assembly |
*2 | Turbocharger Actuator and Link Assembly
·
Electrically-operated Wastegate Valve |
| *a | Thrust Rod | - | - |
|
Intake Air |
|
Exhaust Gas |