CONSTRUCTION
The toll collection (ETC) computer assembly has the controller, antenna, indicator, etc., integrated and is attached to the upper section of the windshield glass.
The toll collection (ETC) computer assembly is connected through the vehicle side wire harness and cable duct sub-assembly.
The indicator light is located on the vehicle interior side and displays the toll collection (ETC) computer assembly status.
There is a fraud prevention switch on the windshield glass side of the toll collection (ETC) computer assembly, employing a framework in which the device cannot be used when removed from the windshield glass.
If using the ETC for the first time, it is required to use the exclusive website and register a user account, press the Bluetooth button on the underside of the toll collection (ETC) computer assembly and activate the device.
| *1 | Toll Collection (ETC) Computer Assembly | *2 | Cable Duct Sub-assembly |
| *a | Front View | *b | Rear View |
| *c | LED Indicator Light | *d | Bluetooth Switch |
| *e | Anti-tamper Button | *f | The illustrations shown are examples only. |