Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
75752C
1.REMOVE FRONT DOOR WINDOW FRAME FRONT MOULDING
Remove front roof side rail weatherstrip retainer (1) with the front door window frame front moulding (2).
Disengage front door window frame front moulding (1) from the front roof side rail weatherstrip retainer (2) in the direction of arrow.
62720A
2.REMOVE QUARTER WINDOW ASSEMBLY
Paint damage.
Mechanical action can lead to paint damage.
Mask those working areas at risk with protective tape.
Remove and install heavy or bulky components with the aid of another person/other persons.
Disengage clip (1) and pull off the edge protection (2) at (3).
Remove clip (1).
Guide the piano wire (1) behind of the quarter window assembly and wrap it completely around the quarter window assembly.
Set the handles (for example, wooden blocks) (2) to the piano wire (1).
Secure the quarter window assembly on the body with protective tape.
To facilitate cutting through the adhesive bead, heat the piano wire (1) with sawing motions.
Cut through the adhesive bead from back to front.
To facilitate cutting through the adhesive bead, heat the piano wire (1) with sawing motions.
There are guide pins in area (A) which can be cut through using increased force.
Cut through adhesive bead completely and remove the quarter window assembly.