The wiper arm must not touch the windshield glass without a wiper blade. Otherwise the windshield glass could be damaged.
In the event of a customer complaint about the cleaning or wiper performance and/or noise (windscreen wiper judder, squeaking noise) of the wiper blades, proceed as follows.
First, check if the customer complaint is caused by contamination (preservation wax with new vehicles, tree resins or other environmental influences) on the windshield glass. If necessary, clean the windshield glass thoroughly.
Replace the wiper blades only if cleaning the windshield glass fails to remedy the situation.
Description is for left component only. Procedure on the right side is identical.
85220
1.REMOVE FRONT WIPER BLADE
Open the front door.
Hold the wiper lever down until the wipers stand still in a roughly vertical position.
Fold out the front wiper arm (3) and open the lock (1).
Remove the front wiper blade (2) from the front wiper arm (3) in the direction of the arrow.