Home › Vehicle Interior › INTERIOR PANELS / TRIM › INSTRUMENT PANEL SAFETY PAD
RM3650E _58 Vehicle Interior _079904 INTERIOR PANELS / TRIM _0387769 INSTRUMENT PANEL SAFETY PAD A

INTERIOR PANELS / TRIM  INSTRUMENT PANEL SAFETY PAD  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for LHD and RHD vehicles.

·

The following procedure is for LHD vehicles.



PROCEDURE

Hide 55312 1.INSTALL INSTRUMENT LOWER PANEL

a.
B539986

Attach the guides (2) to install the instrument lower panel (3).


b.

Tighten the T20 screws (1).

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 55084E 2.INSTALL NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY

a.
B539985

Attach the guides (2) to install the No. 1 heater to register duct sub-assembly (1).


b.
B539984

Replace the adhesive tape (1) and install it.


Hide 55085 3.INSTALL NO. 2 HEATER TO REGISTER DUCT SUB-ASSEMBLY

HINT:

Use the same procedure as for the No. 1 side.


Hide 73960A 4.INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

Hide 55981 5.INSTALL NO. 1 DEFROSTER NOZZLE GARNISH

a.
B540326

Attach the clips (2) and claws (1) to install the No. 1 defroster nozzle garnish (3).