Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT
RM3650E _58 Vehicle Interior _079906 LIGHTING (INT) _0387793 VANITY LIGHT A

LIGHTING (INT)  VANITY LIGHT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 81340 1.REMOVE VANITY LIGHT ASSEMBLY

a.
E415660

Using a molding remover D, detach the claws (3) to remove the vanity light assembly (1) from roof headlining assembly (2).


b.
E415661

Unlock and disconnect connector (1).


c.

Remove vanity light assembly (2).