63605B
1.REMOVE ROOF CONSOLE BOX SUB-ASSEMBLY
Using a molding remover A, detach the claws (2) and guides (3) to remove the roof console box cover (1).
Carefully detach and remove the roof console box cover, not to damage the claws.
|
Push |
Detach the retaining lugs (3) on the left and right using a screwdriver in the direction of the arrows.
Detach the guides (4) to remove the roof console box sub-assembly (1) from the roof headlining assembly (2).
Unlock associated plug (1) connections and disconnect.
81260A
2.REMOVE MAP LIGHT ASSEMBLY
Detach the clamps (2) and guides (4) to remove the map light assembly (1) from the roof console box sub-assembly (3).