Home › Suspension › SUSPENSION CONTROL › FRONT ACCELERATION SENSOR
RM3650E _53 Suspension _079980 SUSPENSION CONTROL _0387938 FRONT ACCELERATION SENSOR A

SUSPENSION CONTROL  FRONT ACCELERATION SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 1.INSTALL ACCELERATION SENSOR ASSEMBLY

a.
C413675

Install the acceleration sensor assembly with the retaining pin (1) in the bore hole at the front shock absorber assembly.


b.

Attach the acceleration sensor assembly.


c.

Tighten down E10 bolt.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


d.

Connect connectors and lock.