Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.
Danger! Life-threatening injuries!
Observe safety information on raising the vehicle using a vehicle hoist.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>VEHICLE LIFT AND SUPPORT LOCATIONS
51249
1.REMOVE REAR SUSPENSION MEMBER DAMPER
Unscrew the E12 bolt (1) and remove the rear suspension member damper (2).
2.REMOVE VIBRATION ABSORBER
Unscrew the bolt (1) on the vibration absorber (2) with the special tool 2 444 999.
Remove the vibration absorber (2).