Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WINDSHIELD OUTSIDE MOULDING
RM3650E _59 Vehicle Exterior _079982 EXTERIOR PANELS / TRIM _0387969 WINDSHIELD OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  WINDSHIELD OUTSIDE MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552E 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

a.
B537138

Disconnect the front door window frame front moulding (1) in the direction of arrow on the roof drip side finish moulding (2).


b.
B537139

Remove the T20 screws (1) on the roof drip side finish moulding (2).


c.
B537140

Disengage the claws (1) to remove the roof drip side finish moulding (2).


d.

Remove the roof drip side finish moulding clips (1).