Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › WINDSHIELD OUTSIDE MOULDING
RM3650E _59 Vehicle Exterior _079982 EXTERIOR PANELS / TRIM _0387969 WINDSHIELD OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  WINDSHIELD OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552E 1.INSTALL ROOF DRIP SIDE FINISH MOULDING

a.
B537140

Install the roof drip side finish moulding clips (1).


b.

Engage the claws (1) to install the roof drip side finish moulding (2).


c.
B537139

Install the T20 screws (1) on the roof drip side finish moulding (2).

Torque:
1.8 N*m (18 kgf*cm, 16 in.*lbf)


d.

Connect the front door window frame front moulding.