Home › Engine / Hybrid System › B58 (INTAKE / EXHAUST) › NO.2 AIR CLEANER HOSE
RM3650E _51 Engine / Hybrid System _080024 B58 INTAKE / EXHAUST _0388146 NO.2 AIR CLEANER HOSE A

B58 INTAKE / EXHAUST  NO.2 AIR CLEANER HOSE  INSTALLATION  


PROCEDURE

Hide 17882 1.INSTALL NO. 2 AIR CLEANER HOSE

a.
A442241

Check the sealing ring (1) on the No. 2 air cleaner hose (3) for damage and replace it, if necessary.


b.

Check the sealing ring (2) on the No. 2 air cleaner hose (3) for damage and replace it, if necessary.


c.

Insert and install No. 2 air cleaner hose.


d.

Lock clamp.

HINT:

The clamp must engage audibly.



e.

Tighten down the T30 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


f.
A442239

Connect connectors (2) and lock.

HINT:

The connector must engage audibly.



g.

Connect connectors (1) and lock.

HINT:

The connector must engage audibly.



Hide 16020 2.CONNECT ELECTRIC WATER PUMP ASSEMBLY

a.

Position the electric water pump assembly.


b.

Insert and install the No. 2 Water Pump bracket sub-assembly.


c.

Tighten nut.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


d.

Connect connectors and lock.


Hide 17880 3.INSTALL AIR CLEANER HOSE ASSEMBLY