Take extra care when handling these precision electronic components.
89745C
1.REMOVE TRANSMITTER BATTERY
| *a | Release Button |
Press the release button to remove the cut key.
|
Remove in this Direction |
Remove the transmitter housing cover as shown in the illustration.
Do not use excessive force when prying apart the transmitter housing cover.
| *a | Protective Tape |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped in protective tape, remove the transmitter battery as shown in the illustration.
Do not push the terminals with your finger.
Do not forcibly pry up the transmitter battery as the terminals may be damaged.
Do not touch the transmitter battery with wet hands. Moisture may cause rust.
Do not touch or move any components inside the transmitter housing case. It may interfere with proper operation.
When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.