Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP
RM3650E _59 Vehicle Exterior _080029 DOOR / HATCH _0388191 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.

Remove remnants of the sealant from the sheet metal flange.


b.

Clean the sheet metal flange.


c.

Replace the back door weatherstrip.


d.

Mount the back door weatherstrip beginning from the top center.


e.

Check the closing function of the back door panel sub-assembly.


f.

The back door panel sub-assembly is not closing correctly.


g.

Make sure that the back door weatherstrip is positioned correctly against adjacent trim panel components.


Hide 64730C 2.INSTALL DECK TRIM SIDE BOARD AND DECK SIDE TRIM COVER RH