68960
1.DISPOSE OF BACK DOOR STAY ASSEMBLY
Fully extend the back door stay assembly.
Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.
Wearing protective glasses, extend the piston rod and cover it with a cloth. At position B, located 50.0 mm (1.97 in.) from position A shown in the illustration, use a metal saw to cut a hole and release the gas.
| Area | Measurement |
|---|---|
| a | 50.0 mm (1.97 in.) |
Always use proper safety equipment and be careful when drilling because shards of metal way fly about.
The gas is colorless, odorless and non-poisonous.