77305A
1.INSTALL FUEL FILLER OPENING LID SUB-ASSEMBLY
Connect connector and lock.
Push the fuel filler opening lid sub-assembly toward the front at an angle into the rear side panel.
Replace the fuel filler opening lid sub-assembly (1).
Clip in the fuel filler opening lid sub-assembly (1) into the rear side panel.
The claws (2) must engage audibly.
Connect the retaining strap (1) in the direction of the arrow.
Close the fuel tank cap assembly (2).
77350
2.INSTALL FUEL FILLER OPENING LID ASSEMBLY
Slide the fuel filler opening lid assembly (2) in the direction of the arrow onto the hinge until you can hear the lock (1) engage.