Home › Vehicle Exterior › MIRROR (EXT) › OUTER REAR VIEW MIRROR
RM3650E _59 Vehicle Exterior _080030 MIRROR (EXT) _0388199 OUTER REAR VIEW MIRROR A

MIRROR (EXT)  OUTER REAR VIEW MIRROR  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:

Description is for left component only. Procedure on the right side is identical.


PROCEDURE

Hide 1.INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY

a.
B640837C01
0,0 0,0 false
V100136

Install in this Direction


Install the outer mirror control ECU assembly (3) in the direction of the arrow.


b.

Attach the guides (2).


c.

Connect the connector (1) and lock.


d.
B640835

Attach the claws (2).


e.

Tighten the T10 screw (1).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)


f.
B640838C01
0,0 0,0 false
V100136

Insert in this Direction


Insert the cable (1) in the direction of the arrow.


g.
B640832

Connect all connectors (1) to the connector housing (2) and lock.


h.
B640839C01
0,0 0,0 false
V100136

Install in this Direction


Install the connector housing (1) in the direction of the arrow.


Hide 87945C 2.INSTALL OUTER MIRROR LOWER COVER

a.
B640833

Attach the claws to install the outer mirror lower cover (1).


Hide 87941A 3.INSTALL OUTER MIRROR VISOR

B506390

a.

Tighten the T10 screws (1) on the outer mirror visor (2).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)


Hide 81740 4.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY

Hide 8794A 5.INSTALL NO. 2 OUTER MIRROR COVER

a.
B506389

Guide in the No. 2 outer mirror cover (2) carefully.


b.

Connect and lock the connector on the side turn signal light assembly (3).


c.

Tighten down the T10 screw (1).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)


d.

Ensure that the housing fits correctly on the side turn signal light assembly and the No. 2 outer mirror cover.


e.
B506387

Tighten the T10 screws (1).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)


Hide 87909 6.INSTALL OUTER MIRROR ACTUATOR ASSEMBLY

a.

Connect the connector and lock.


b.

for Type A:

i.
B506383

Position the outer mirror actuator assembly (2) correctly.


ii.

Tighten the 3 T10 screws (1).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)



c.

for Type B:

i.
B612660

Position the outer mirror actuator assembly in such a way that the markings (1) and (2) match correctly as shown.


ii.
B612658C02
0,0 0,0 false
V113147

Install in this Direction


Engage the claws to install the outer mirror actuator assembly as shown in the illustration.


iii.
B612659

Tighten the T10 screws (1).

Torque:
1.2 N*m (12 kgf*cm, 11 in.*lbf)