Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › ENGINE WIRE HARNESS (for No. 3)
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388318 ENGINE WIRE HARNESS(for No. 3) A

B48 ENGINE CONTROL  ENGINE WIRE HARNESS(for No. 3)  INSTALLATION  


PROCEDURE

Hide 82123 1.INSTALL NO. 3 ENGINE WIRE

NOTICE:
·

Improper routing of cables and wiring harnesses.

Trapped, crushed or damaged cables may cause short circuits and malfunctions.

-

Route all cables without abrasions, do not trap and crush.




a.
A442152

Insert and install the No. 3 engine wire (2).


b.

Connect and lock all connectors (1) in the direction of the arrow.

HINT:

All connectors (1) must engage audibly.



c.
A441489

Connect and lock the connector (4).

HINT:

The connector (4) must engage audibly.



d.

Insert and install the tank ventilation line (1).


e.

Lock the lock (2).


f.

Lock the lock (3).


g.

Insert and lock the holder (5).


h.
A442111

Install the engine room ECU cover (2).

HINT:

The snap-lock couplings (1) must engage audibly.



Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL