Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › INTAKE AIR TEMPERATURE SENSOR
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388324 INTAKE AIR TEMPERATURE SENSOR A

B48 ENGINE CONTROL  INTAKE AIR TEMPERATURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89424G 1.INSTALL INTAKE AIR TEMPERATURE SENSOR

NOTICE:
·

Contaminant or foreign body.

Contamination can result in malfunctions, operating failure or leaks.

-

Adhere to the utmost cleanliness.

-

Protect components from contamination e.g. by covering.

-

Close off line connections with seal plugs.




a.
A442214

Replace the O-ring (1) on the intake air temperature sensor.


b.

Guide in the intake air temperature sensor.


c.

Using a 17 mm deep socket wrench, tighten the intake air temperature sensor.

Torque:
2.25 N*m (23 kgf*cm, 20 in.*lbf)


d.

Connect connectors and lock.


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY