Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › MASS AIR FLOW METER
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388325 MASS AIR FLOW METER A

B48 ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY

a.
A442210

Install the intake mass air flow meter sub-assembly (3).


b.

Tighten down T20 screws (2).

Torque:
1.4 N*m (14 kgf*cm, 12 in.*lbf)


c.

Connect connectors (1) and lock.


Hide 2.PERFORM INITIALIZATION

a.

Connect the diagnosis system to the vehicle and enter the following menus:

Vehicle management / Service functions / Drive / Engine electronics / Reset adaptations / ABL Reset adaptation values