Home › Engine / Hybrid System › B48 (ENGINE CONTROL) › AIR PRESSURE SENSOR
RM3650E _51 Engine / Hybrid System _080056 B48 ENGINE CONTROL _0388326 AIR PRESSURE SENSOR A

B48 ENGINE CONTROL  AIR PRESSURE SENSOR  INSTALLATION  


PROCEDURE

Hide 89421R 1.INSTALL AIR PRESSURE SENSOR

a.
A442209

Apply a thin coat of syntheso glep 1 lubricating grease to the O-ring (1) of the air pressure sensor.


b.

Install the air pressure sensor.


c.

Tighten down T25 screw.

Torque:
4.0 N*m (41 kgf*cm, 35 in.*lbf)


d.

Connect connectors and lock.


Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY