Home › Engine / Hybrid System › B58 (ENGINE CONTROL) › ENGINE COOLANT TEMPERATURE SENSOR (for Radiator)
RM3650E _51 Engine / Hybrid System _080064 B58 ENGINE CONTROL _0388354 ENGINE COOLANT TEMPERATURE SENSOR(for Radiator) A

B58 ENGINE CONTROL  ENGINE COOLANT TEMPERATURE SENSOR(for Radiator)  INSTALLATION  


PROCEDURE

Hide 89422A 1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR

CAUTION:
·

Hot fluids.

Risk of scalding!

-

Conduct all work in the vehicle wearing appropriate personal protective equipment only.




a.
A442140

Check the O-ring on the engine coolant temperature sensor (1) for damage and replace the O-ring where required.


b.

Install the engine coolant temperature sensor (1) in the radiator.


c.

Lock the locks (arrows).


d.

Connect connectors and lock.

HINT:

The connector must engage audibly.



Hide 2.INSPECT FOR COOLANT LEAK (for High Temperature)