Home › Engine / Hybrid System › B48 (INTAKE / EXHAUST) › NO.2 AIR CLEANER HOSE
RM3650E _51 Engine / Hybrid System _080067 B48 INTAKE / EXHAUST _0388412 NO.2 AIR CLEANER HOSE A

B48 INTAKE / EXHAUST  NO.2 AIR CLEANER HOSE  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




PROCEDURE

Hide 17880 1.REMOVE AIR CLEANER HOSE ASSEMBLY

Hide 17882 2.REMOVE NO. 2 AIR CLEANER HOSE

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




a.
A442216

Unlock and loosen the connector (1) on the charging pressure sensor.


b.

Loosen clamp (2).


c.

Unlock and disconnect the connector (3) from the charge-air temperature sensor.


d.

Remove T30 bolts (arrows).


e.

Unlock and loosen the clamp (4) on the turbocharger sub-assembly.


f.

Guide out and remove No. 2 air cleaner hose (5).