17882
1.INSTALL NO. 2 AIR CLEANER HOSE
Replace the throttle body gasket (1).
Check the gasket (1) on the No. 2 air cleaner hose for damage and replace it, if necessary.
Insert and install No. 2 air cleaner hose.
Lock the clamp on the turbocharger sub-assembly.
The clamp must engage audibly.
Tighten T30 bolts.
Connect and lock the connector on the intake air temperature sensor.
Connect and lock the connector on the air pressure sensor.
All connectors must audibly engage.
Secure clamps.
17880
2.INSTALL AIR CLEANER HOSE ASSEMBLY