Home › Engine / Hybrid System › B48 (INTAKE / EXHAUST) › AIR CLEANER ASSEMBLY
RM3650E _51 Engine / Hybrid System _080067 B48 INTAKE / EXHAUST _0388418 AIR CLEANER ASSEMBLY A

B48 INTAKE / EXHAUST  AIR CLEANER ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 17700 1.INSTALL AIR CLEANER ASSEMBLY

a.
A442206

Check the rubber mount for correct fit.


b.

Feed the air cleaner in and engage it in the rubber mounts (marks).


c.

Connect connectors and lock.

HINT:
·

The connector must engage audibly.

·

Note the installation position of the component. The component may be installed in various installation positions.




d.

Tighten clamp.

Torque:
: 3.0 N*m (31 kgf*cm, 27 in.*lbf)