Home › Engine / Hybrid System › B48 (INTAKE / EXHAUST) › EXHAUST MANIFOLD HEAT INSULATOR
RM3650E _51 Engine / Hybrid System _080067 B48 INTAKE / EXHAUST _0388419 EXHAUST MANIFOLD HEAT INSULATOR A

B48 INTAKE / EXHAUST  EXHAUST MANIFOLD HEAT INSULATOR  REMOVAL  


PROCEDURE

Hide 17880 1.REMOVE AIR CLEANER HOSE ASSEMBLY

Hide 17168 2.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.




a.
A441842

Loosen E10 bolt (1) and T30 bolt(2).


b.

Disconnect No. 1 exhaust manifold heat insulator (3) in the marked area and remove.


c.
A441843

Loosen E10 bolts (1).


d.

Remove the No. 1 exhaust manifold heat insulator (2).