Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING
RM3650E _59 Vehicle Exterior _079982 EXTERIOR PANELS / TRIM _0388649 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the LH and RH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75072A 1.INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY

a.

Peel off the liner from adhesive tape.


b.
B537220

Engage the clips in the order as shown the illustration, and install the front door outside moulding sub-assembly.


c.
B537214

Press on adhesive strip (1) tightly by hand in sections.


d.
B537213

Install the screws (1).

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 67862 2.INSTALL FRONT DOOR WEATHERSTRIP

a.
B537211

Engage the clips to install the front door weatherstrip (1).