Home › Suspension › FRONT SUSPENSION › FRONT SUSPENSION MEMBER LOWER PROTECTOR
RM3650E _53 Suspension _079510 FRONT SUSPENSION _0388782 FRONT SUSPENSION MEMBER LOWER PROTECTOR A

FRONT SUSPENSION  FRONT SUSPENSION MEMBER LOWER PROTECTOR  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Vehicle may slip off the vehicle hoist if the vehicle hoist is handled incorrectly.

Danger! Life-threatening injuries!

-

Observe safety information on raising the vehicle using a vehicle hoist.




NOTICE:

Driving without front suspension member lower protector is not permissible.


PROCEDURE

Hide 51410 1.REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

a.
A442437

Remove screws (arrows).


b.

Remove the No. 1 engine under cover assembly (1).


Hide 53896B 2.REMOVE FRONT FENDER SPLASH FRONT SHIELD LH

a.
C482832

Remove screws (arrows).


b.

Feed out the front fender splash front shield LH (1) to the side and remove.


Hide 53895B 3.REMOVE FRONT FENDER SPLASH FRONT SHIELD RH

HINT:

Use the same procedure as for the LH side.


Hide 50819 4.REMOVE FRONT FLOOR COVER

a.
A442436

Remove screws (arrows).


b.

Remove the front floor cover (1).


Hide 51219 5.REMOVE FRONT SUSPENSION MEMBER LOWER PROTECTOR

a.
A442439

Remove screws (arrows).


b.

Loosen the 16 mm bolts (2).


c.

Remove the front suspension member lower protector (1).