Home › Engine / Hybrid System › B58 (ENGINE MECHANICAL) › VALVE LASH ADJUSTER
RM3650E _51 Engine / Hybrid System _080179 B58 ENGINE MECHANICAL _0388904 VALVE LASH ADJUSTER A

B58 ENGINE MECHANICAL  VALVE LASH ADJUSTER  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Hot surfaces.

Risk of burning!

-

Perform all work only on components that have cooled down.



·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Detach battery earth lead from battery.

-

For an auxiliary battery: Disconnect battery earth lead of auxiliary battery.




NOTICE:
·

Damage to battery terminal, the safety battery terminal or the intelligent battery sensor (IBS).

Damaged battery terminals can lead to malfunctions or vehicle electrical system faults.

-

Pull off battery terminal from battery pole by carefully moving to and fro. Do not pry off using a tool.




PROCEDURE

Hide 13801 1.REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

Hide 13750 2.REMOVE VALVE LASH ADJUSTER ASSEMBLY

NOTICE:

If the valve lash adjuster assemblies are reused, they must be reinstalled at the same position.


a.
A441636

Remove all valve lash adjuster assemblies (1) in the direction of arrow to the top.