Home › Steering › STEERING COLUMN › STEERING COLUMN COVER
RM3650E _55 Steering _080257 STEERING COLUMN _0389217 STEERING COLUMN COVER A

STEERING COLUMN  STEERING COLUMN COVER  INSTALLATION  


PROCEDURE

Hide 45287 1.INSTALL LOWER STEERING COLUMN COVER

a.
C413492

Connect connectors (1) and lock.


b.

Engage the cable clip (2).


c.
C413493

Align the lower steering column cover (1) at the retaining lugs (2) to the steering column.

HINT:

Use the same procedure for the opposite side.



d.

Press the lower steering column cover (1) upwards in direction of arrow until the retaining lugs (2) engage.

HINT:

Use the same procedure for the opposite side.



Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.
C413486

Guide in the upper steering column cover (1).

HINT:

Use the same procedure for the opposite side.



b.

Press the upper steering column cover (1) down and engage.

HINT:
·

Use the same procedure for the opposite side.

·

The upper steering column cover (1) must engage audibly and perceptibly.




c.
C413487

Seal the bore hole using a rubber plug (1).

HINT:

Use the same procedure for the opposite side.



d.
C413488

Clip the gap cover (1) into the clips (marks).