Home › Engine / Hybrid System › B48 (EMISSION CONTROL) › PURGE VALVE
RM3650E _51 Engine / Hybrid System _080100 B48 EMISSION CONTROL _0394117 PURGE VALVE A

B48 EMISSION CONTROL  PURGE VALVE  INSTALLATION  


PROCEDURE

Hide 23285A 1.INSTALL NO. 1 CHECK VALVE

a.
A442222

Secure the No. 1 check valve (4) to the holder (3).


b.

Connect and lock the tank ventilation lines (1).

i.

Make sure you can hear the tank ventilation lines (1) engage.



c.

Connect and lock the connector (2).

i.

The connector (2) must engage audibly.



Hide 12601B 2.INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY