Home › Power Source / Network › B48 (BATTERY / CHARGING) › BATTERY
RM3650E _57 Power Source / Network _080072 B48 BATTERY / CHARGING _0388705 BATTERY L

B48 BATTERY / CHARGING  BATTERY  PRECAUTION  


BATTERY PRECAUTION


·

Do not exceed the maximum charging voltage of 14.8 V when charging an battery!

·

Do not use rapid-charging!

·

Recommended temperature for charging 15 to 25°C

·

The battery is sufficiently charged when the charge current drops below 2.5 amperes.

·

Do not connect the battery charger to the 12 V power socket!

·

Only charge the battery via the jump starting positive battery terminal point.


Note for Service:

·

Do not open battery.


Caution! Danger of destruction to battery state sensor assembly and wiring upon battery replacement:

·

Do not introduce any additional connections at the battery negative terminal.

·

Do not modify the earth wire.

·

Do not use force when disconnecting the earth wire from the battery terminal.

·

Do not place any tools under the battery state sensor assembly to lever off the earth wire.

·

Do not use battery state sensor assembly connections as levers.

·

Avoid contact between battery state sensor assembly and ground.


HINT:

Only exchange the battery state sensor assembly when there is a corresponding fault code entry!