12261
1.INSTALL VENTILATION HOSE
Latch mechanisms, guides and mounting elements must not be damaged or missing.
Check the seals (1) for damage and replace the ventilation hose where required.
Connect the ventilation hose (2) to the cylinder head cover and lock in place.
The lock (3) must audibly engage.
Connect ventilation hose (2) at the connecting branch of the exhaust turbocharger and lock.
The lock (1) must audibly engage.
Connect the ventilation hose on the bottom to the ventilation hose and lock.
Lock must audibly engage.
Clip in cable clips (2) where marked on the ventilation hose.
Connect connectors (1) and lock.
The locks must engage audibly.
17700
2.INSTALL AIR CLEANER ASSEMBLY