Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
If the installation area of the headlight assembly is damaged, use a supply retainer for a low-cost repair.
Ensure that the headlight assembly is not damaged.
1.INSTALL HEADLIGHT REPAIR KIT
The headlight support repair kit can be used for the retaining ring (1) and (2) and (3) and (4).
If necessary, remove damaged retaining ring (1) as shown (2).
Mount the enclosed reinforcement plate (3) in new retaining ring (4).
Secure the new retaining ring with enclosed screws (5).
If necessary, remove damaged retaining ring (1) as shown (2).
Mount the enclosed reinforcement plate (3) in new retaining ring (4).
Secure the new retaining ring with enclosed screws (5).
If necessary, remove damaged retaining ring (1) as shown (2).
Mount the enclosed reinforcement plate (3) in new retaining ring (4).
Secure the new retaining ring with enclosed screws (5).
If necessary, remove damaged retaining ring (1) as shown (2).
Screw in the enclosed nut (3) to new retaining ring (4).
Secure the new retaining ring with enclosed screws (5).