| *A | for 2 Port Type |
| *B | for 6 Port Type |
Check the shape of the Turbo Charger SUB-ASSY before doing removal/installation work.
17700
1.REMOVE AIR CLEANER ASSEMBLY
17167
2.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR (for 2 Port Type)
Hot surfaces.
Risk of burning!
Perform all work only on components that have cooled down.
Loosen the bolts (1).
Remove the No. 1 exhaust manifold heat Insulator (2).
17167
3.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR (for 6 Port Type)
Loosen screws (1).
Loosen screw (2).
Feed out and remove the No. 1 exhaust manifold heat Insulator (3).
Loosen screws (1).
Feed out and remove the No. 1 exhaust manifold heat Insulator (2).