Home › Engine / Hybrid System › B58 (EMISSION CONTROL) › CANISTER
RM3650E _51 Engine / Hybrid System _080101 B58 EMISSION CONTROL _0388646 CANISTER G

B58 EMISSION CONTROL  CANISTER  INSPECTION  


PROCEDURE

Hide 1.INSPECT CHARCOAL CANISTER SUB-ASSEMBLY (for Type A)

a.

Visually check the charcoal canister sub-assembly.

i.

Visually check the charcoal canister sub-assembly for cracks or damage.

If cracks or damage are found, replace the charcoal canister sub-assembly.



b.

Inspect the ventilation of the charcoal canister sub-assembly.

i.
A471772C01
1.604,0.938 1.917,0.885 true 1.302,1.51 1.792,2.01 true 1.313,0.323 1.271,0.646 true 2.073,0.188 2.385,0.188 false 1.99,0.823 2.302,0.979 0.313,0.156 10 false *a 1.271,0.115 1.583,0.271 0.313,0.156 10 false *b 1.844,1.99 2.156,2.146 0.313,0.156 10 false *c 1.854,0.115 2.167,0.271 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Vacuum Pump


Using a vacuum pump, apply vacuum (2.0 kPa (15 mmHg, 0.59 in.Hg)) to the port (A) with the port (B) and port (C) closed.

OK:

Air does not flow.



ii.
A471776C01
1.958,0.802 2.344,0.677 true 0.958,0.563 1.531,0.74 true 1.094,1.729 1.573,1.531 true 2.375,0.583 2.688,0.74 0.313,0.156 10 false *a 0.76,0.469 1.073,0.625 0.313,0.156 10 false *b 0.896,1.688 1.208,1.844 0.313,0.156 10 false *c 1.875,0.156 2.188,0.313 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Air


Close the port (C) and apply compressed air 0.5 kPa (0.005 kgf/cm2, 0.1 psi) to the port (A).

OK:

Air flows out from the port (B).



iii.
A471778C01
1.958,0.792 2.208,0.604 true 1.146,0.781 1.542,0.771 true 1.063,1.677 1.531,1.552 true 2.25,0.51 2.563,0.667 0.313,0.156 10 false *a 0.917,0.698 1.229,0.854 0.313,0.156 10 false *b 0.833,1.604 1.146,1.76 0.313,0.156 10 false *c 1.917,0.115 2.229,0.271 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Air


Apply compressed air 0.5 kPa (0.005 kgf/cm2, 0.1 psi) to the port (A).

OK:

Air flows out from the port (B) and port (C).




Hide 2.INSPECT CHARCOAL CANISTER SUB-ASSEMBLY (for Type B)

a.

Visually check the charcoal canister sub-assembly.

i.

Visually check the charcoal canister sub-assembly for cracks or damage.

If cracks or damage are found, replace the charcoal canister sub-assembly.



b.

Inspect the ventilation of the charcoal canister sub-assembly.

i.
A471773C01
2.021,1.146 2.188,1.083 true 0.688,0.708 0.573,1.219 true 1.49,1.198 2.344,1.833 true 2.063,0.219 2.375,0.219 false 2.219,0.958 2.531,1.115 0.313,0.156 10 false *a 2.417,1.813 2.729,1.969 0.313,0.156 10 false *b 0.417,1.24 0.729,1.396 0.313,0.156 10 false *c 1.875,0.135 2.188,0.292 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Vacuum Pump


Using a vacuum pump, apply vacuum (2.0 kPa (15 mmHg, 0.59 in.Hg)) to the port (A) with the port (B) and port (C) closed.

OK:

Air does not flow.



ii.
A471777C02
2.354,0.938 2.573,0.823 true 1,0.615 0.833,0.854 true 1.719,1.021 1.25,1.125 true 2.604,0.729 2.917,0.885 0.313,0.156 10 false *a 1.052,1.031 1.365,1.188 0.313,0.156 10 false *b 0.708,0.865 1.021,1.021 0.313,0.156 10 false *c 2.521,0.396 2.833,0.552 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Air


Close the port (C) and apply compressed air 0.5 kPa (0.005 kgf/cm2, 0.1 psi) to the port (A).

OK:

Air flows out from the port (B).



iii.
A471779C01
2.271,0.906 2.49,0.906 true 0.927,0.594 0.76,0.833 true 1.677,1.156 1.229,1.396 true 2.531,0.802 2.844,0.958 0.313,0.156 10 false *a 1.021,1.354 1.333,1.51 0.313,0.156 10 false *b 0.646,0.833 0.958,0.99 0.313,0.156 10 false *c 2.427,0.458 2.74,0.615 0.313,0.156 10 false *d
*a Port (A)
*b Port (B)
*c Port (C)
*d Air


Apply compressed air 0.5 kPa (0.005 kgf/cm2, 0.1 psi) to the port (A).

OK:

Air flows out from the port (B) and port (C).